NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Steering Wheel

Nissan Armada 2025-2026 Service and Repair Manual / Steering / Steering System / Steering Wheel

Exploded View

Steering wheel        
: N·m (kg-m, ft-lb)        
: Always replace after every disassembly.

Removal and Installation

REMOVAL

NOTE:

When reconnecting spiral cable, fix cable with a tape so that fixing case and rotating part keep aligned. This will omit neutral position alignment procedure during spiral cable installation.

Set vehicle to the straight-ahead position.

Remove driver air bag module. Refer to Removal and Installation.

Lock the steering wheel and remove the steering wheel mounting bolt.

CAUTION:

Leave 2 - 3 thread of mounting bolt, do not completely remove.

Pull the steering wheel to release the spline.

NOTE:

To align the position when installing, apply the matching mark to steering wheel and column shaft head with paint.

Remove the mounting bolt and remove the steering wheel from the steering column.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • Adjust neutral position of steering angle sensor. Refer to Work Procedure.

  • If equipped with ProPILOT Assist, perform steering torque calibration after replacing or removal and installation the steering wheel. Refer to Work Procedure.

  • Check the spiral cable neutral position after replacing or rotating spiral cable. Refer to Removal and Installation.

    CAUTION:

    Never twist spiral cable excessively after it becomes tight. (Twisting may cause the cable to be torn off.)

  • Never reuse steering wheel mounting bolt.

    Other materials

    Additional Service When Replacing A/c Auto Amp.
    Description After replaced A/C auto amp. it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.AFTER REPLACEMENTCAUTION: When replacing A/C auto amp. write vehicle specification with CONSULT vehicle configuration. Never perform vehicle configura ...

    Take Away Warning Does Not Operate
    Diagnosis Procedure CHECK METER SPEAKER Check meter speaker. Refer to Removal and Installation. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning parts. CHECK INFORMATION DISPLAY Check information display. Refer to Work flow. Is the inspection re ...

    Ipdm E/r
    Exploded View IPDM E/R cover A IPDM E/R IPDM E/R cover B IPDM E/R cover C IPDM E/R cover D IPDM E/R cover E IPDM E/R cover bracket         : Pawl         Removal and Installation REMOVALDisconnect the battery cable from the negativ ...