Description
The vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, advanced hill descent control function (4WD models) and trailer sway control function operates.
Diagnosis Procedure
CHECK SYMPTOM
Check that the vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, advanced hill descent control function (4WD models) and trailer sway control function operates.
Is the inspection result normal?
YES>>Normal
NO>>GO TO 2.
PERFORM SELF-DIAGNOSIS (1)
With CONSULT
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 3.
CHECK CONNECTOR
With CONSULT
-
Disconnect 12V battery negative terminal.
-
Disconnect the ABS actuator and electric unit (control unit) harness connector.
-
Check the connector terminal for deformation, disconnection and looseness.
-
Connect the ABS actuator and electric unit (control unit) harness connector, and perform self-diagnosis for “ABS” again.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Poor connection of connector terminal. Repair or replace connector terminal.
PERFORM SELF-DIAGNOSIS (2)
With CONSULT
-
Connect 12V battery negative terminal.
-
Perform self-diagnosis for “ENGINE” and “TRANSMISSION”.
Is DTC detected?
YES>>Check the DTC.
-
ECM: Refer to DTC Index.
-
TCM: Refer to DTC Index.
Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation.
Other materials
Turbocharger
Exploded View
Bank 1 side
Water inlet hose
Clamp
Water inlet tube
O-ring
Heat insulator (upper)
Oil return pipe 1
Oil return hose
Oil return pipe 2
Heat insulator (lower)
Water outlet tube
Turbocharger assembly
Gasket 1
Stud bolt
Oil feed tube
Eye bolt ...
Mac Key Writing
Description
When replacing around view monitor control unit, it is necessary to write MAC key to around view monitor control unit. Write MAC key to around view monitor control unit according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.CAUTION:
During MAC key ...
Driving Video Recorder Control Module
Removal and Installation
REMOVALCAUTION:
Before replacing driving video recorder control module, perform “ADDITIONAL SERVICE WHEN REPLACING DRIVING VIDEO RECORDER CONTROL MODULE”. For details, refer to Work Procedure.
Before replacing the driving video recorder control module, the customer s ...