Exploded View
 |
A/T assembly |  |
A/T fluid warmer |  |
O-ring |
 |
: N·m (kg-m, in-lb) | ||||
 |
: Always replace after every disassembly. | ||||
 |
: Apply ATF | ||||
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
Perform this step when the engine is cold.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
Drain engine coolant. Refer to ENGINE COOLANT : Draining.
Remove water hoses from A/T fluid warmer. Refer to Removal and Installation.
Remove A/T fluid warmer mounting bolts (
) and then remove A/T fluid warmer .
Remove O-rings from A/T fluid warmer.
CAUTION:
Never reuse O-rings.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Never reuse O-rings.
-
Apply A/T fluid to the O-rings.
-
Make sure O-rings are securely seated in back of A/T fluid warmer before installing A/T fluid warmer.
Other materials
Connection to Roadside Assistance
In the event of a roadside emergency involving your Nissan Armada, professional
Roadside Assistance services are available to provide support.
Refer to your Warranty Information Booklet (U.S.) or Warranty & Roadside Assistance
Information Booklet (Canada) for full details regarding coverage ...
Service Information for Electrical Incident
Work Flow
WORK FLOW STEP DESCRIPTION
STEP 1
Get detailed information about the conditions and the environment when the incident occurred.
The following are key pieces of information required to make a good analysis:
WHAT
vehicle Model, Engine, Transmission/Transaxle and the System (i.e. Ra ...
Auto Door Lock Operation Does Not Operate. Automatic Back Door Control Unit
Automatic Back Door Control Unit
Diagnosis Procedure
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>
INSPECTION END
NO>>
Check intermittent incident. Refer to Inter ...