High Strength Steel (HSS) and Ultra High Strength Steel (UHSS)Inspection
NOTE:
If the hood lock control cable assembly is bent or deformed, replace it.
Check that secondary latch is securely engaged with bracket from dead load of hood assembly.
Check that primary latch is securely engaged with hood striker when hood assembly is closed [freefall from approximately 200 m ...
Work Procedure
STEP 1
Fully close the back door manually.
>>
GO TO 2.
STEP 2
Operate back door opener switch and perform automatic back door open operation.
>>
GO TO 3.
STEP 3
The back door fully opens.
Check that automatic back door warning buzzer sounds normally.
Does automatic back door warning ...
Removal & Installation
WARNING:
REMOVAL
Remove front cover. Refer to Removal & Installation.
Remove timing chain. Refer to Removal and Installation.
Remove fuel tube assembly. Refer to Removal and Installation.
Remove high pressure fuel pump. Refer to Removal & Installation.
Remove camshaft sprockets (INT and EXH) ...