Nissan Armada 2025-2026 Service and Repair Manual: Second Seat (bench Seat)

Disassembly and Assembly

CAUTION: OUTSIDE SEAT CUSHION FINISHER OUTER Disassembly Disengage fixing pawls, and then remove reclining knob cap. : Pawl Disengage fixing portion using a remover tool (A) according to numeric ...

Exploded View

REMOVAL Outer headrest Second seat assembly (RH seat) Outside seat leg cover (RH seat) Inside seat leg cover (RH seat) Inside seat leg cover (LH seat) Outside seat leg cover (LH seat) Second se ...

Other materials:

MIG Welding Method
(1) PLUG WELDING MIG plug welding method is used to repair the spot welded portions. Keep the upper panel and lower panel tightly together. Before welding, contact closely the points to be plug welded. Observe the welding condition described in the Body Repair Manual. (a) Welding condition (plug wel ...

Lubricant or/and Sealant
Name Description Note Nissan multi-purpose Special Grease No. 2 Clevis pin of brake pedal — MOLYKOTE® AS880N or siliconebased grease Front brake Molykote is a registered of Dow Corning Corporation MOLYKOTE® 7439 Front brake Molykote is a registered of Dow Corning Corporation Rubber ...

ENGINE COOLANT : Refilling
WARNING: REFILLING (FOR COOLANT REFILL TOOL) WARNING: If the multi-way control valve is not fully open, engine over heat risk may increase when driving caused by air remaining(LLC is not fully filled) in the coolant hose. CAUTION: Do not put additive such as waterleak preventive, since it may cause ...