Basic information
WARNING
- Never attempt to adjust the Nissan Armada steering wheel while the vehicle is in motion. Doing so may result in loss of control and could lead to a serious accident.
- Do not position the Nissan Armada steering wheel closer than necessary
for safe and comfortable driving. The driver’s air bag deploys with significant
force, and improper seating position increases the risk of severe injury or
fatal consequences.
Always sit fully back against the seatback, maintain a safe distance from the steering wheel, and ensure that seat belts are properly fastened at all times.
Manual operation
To manually adjust the Nissan Armada steering wheel, pull the lock lever 1 downward and set the steering wheel to your preferred height and reach (tilt and telescopic position).
Once the desired position is achieved, push the lock lever upward firmly to secure the Nissan Armada steering wheel in place.
Power operation
Tilt or telescopic operation
The Nissan Armada steering wheel can also be adjusted electronically using the control lever 1, allowing smooth and precise tilt and telescopic positioning for optimal driving comfort.
Entry/Exit function operation:
The Nissan Armada memory seat system automatically raises the steering wheel when the driver’s door is opened and the ignition is OFF.
This intelligent feature improves accessibility, making it easier to enter and exit the Nissan Armada without obstruction.
Additionally, when returning to the driving position, the steering wheel can automatically return to its preset position, enhancing convenience and personalization.
Other materials
Driving safety precautions
Your Nissan Armada is engineered to deliver confident performance both on paved
roads and in light off-road conditions. However, it is important to understand that
the Nissan Armada is primarily designed for recreational and everyday driving, and
not for extreme off-road environments. Avoid dr ...
Diagnosis and Repair Work Flow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform an interview utilizing Diagnostic Work Sheet and reproduce symptoms as well as fully understand it. Ask customer about his/her complaints carefully. Check symptoms by driving vehic ...
Rack End Value Reset
Work Procedure
NOTE:
When steering column assembly and steering gear assembly are replaced, rack end value reset (steering wheel turning angle learning value reset) is performed.
When the toe-in is adjusted, back end value reset (steering wheel turning angle learning value reset) is performed.
...