Disassembly and Assembly
Exploded ViewWork Procedure
Description
When the automatic report function of the TCU is activated, the TCU locks the automatic report function after the automatic report. Therefore, it is necessary to release the lock on the TCU after the automatic report function of the TCU is activated.
Work Procedure
AUTOMATIC REPORT PREVE ...
Removal and Installation
REMOVAL
Remove spiral cable assembly. Refer to Removal and Installation.
Remove steering angle sensor from spiral cable.
INSTALLATION
Note the following, and install in the reverse order of removal.
When replacing the angle sensor , if the lock pin is installed, remove the lock pin after installing ...
Exploded View
Circular clip Dust shield Housing Snap ring Ball cage/steel ball/inner race assembly Stopper ring Boot band Boot Shaft Circular clip Joint sub-assembly : Wheel side : Always replace after every disassembly. 1: NISSAN Genuine grease or equivalent. 2: Apply paste [service parts (44003 ...