Removal and Installation
Exploded ViewWork Flow
DETAILED FLOW
INTERVIEW FROM THE CUSTOMER
CAUTION:
>>
GO TO 2.
CHECK SYMPTOM
CAUTION:
>>
GO TO 3.
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC detected?
YES>>
Record or print self-diagnosis results and freeze frame data (FFD). ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
When disconnecting the battery terminal, pay attention to the following.
Always use a 12V battery as power source.
Never disconnect battery terminal while engine is running.
When removing the 12V battery terminal, turn OFF the ignition switch and wait at least 30 seconds.
For vehicles with the engi ...
Removal and Installation
REMOVAL
Remove driver knee air bag module. Refer to Removal and Installation.
Remove BCM. Refer to Removal and Installation.
Remove fuse block (J/B).
Disconnect the stop lamp switch harness connectors.
Remove stop lamp switch , follow the procedure below.
Rotate the stop lamp switch counterclockwi ...