- Basic information
- RCTA system operation
- How to enable/disable the RCTA system
- System temporarily unavailable
- System maintenance
Other materials
Precautions
Precautions for Removing Battery Terminal
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignit ...
Front Door Module Assembly
Removal and Installation
REMOVALCAUTION:
Before removing, take a short memo/photo to remember door harness and cable layout.Remove front door glass. Refer to Removal and Installation.
Disconnect harness connectors , and then disengage harnesses fixing clips.
: Clip
Remove hole seals from fro ...
System Initialization
Description
If any of the following operations are performed, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.
When each power window motor replaced.
Power supply to the each power window motor is not cut off properly.
Removal and installatio ...