- Basic information
- RearView Monitor system operation
- Difference between predictive and actual distances
- How to park with predictive course lines
- RearView Monitor system limitations
Other materials
Repairing Material
Foam Repair
During factory body assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam insulators.URETHANE FOAM APPLICATIONSUse commercially available Urethane foam for sealant (foam materi ...
Display Screen Is Not Displayed (information Display)
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS OF DISPLAY UNIT
Perform “Self Diagnostic Result” of “Display unit”.
Is DTC detected?
YES>>
Perform diagnosis procedure on the detected DTC. Refer to DTC Index.
NO>>
GO TO 2.
PERFORM SELF-DIAGNOSIS OF COMBINATION METER
Perform “Self D ...
Normal Operating Condition
Symptom Description
SYSTEM UNITLIQUID CRYSTAL DISPLAY Symptom Possible cause Possible solution
The screen is too dark.
The cabin temperature is too low.
Wait until the cabin temperature becomes moderate.
The cabin temperature is too hot.
Screen brightness is set to the maximum darkness ...