- Precautions
- Front Final Drive: R180a Tools and Preparation
- Noise, Vibration and Harshness (nvh) Troubleshooting
- Front Differential Gear Oil
- Front Oil Seal
- Side Oil Seal
- Air Breather
- Front Final Drive Assembly
- Side Shaft
- Differential Assembly
- Drive Pinion
Other materials
Starting the engine
Basic information
1. Apply the parking brake.
2. Confirm that the Nissan Armada is in the P (Park) position.
The Intelligent Key must be inside the Nissan Armada when operating the ignition
system.
3. Press the ignition switch to the ON position. Then depress the brake pedal
and press the ig ...
Refrigerant Pressure Sensor
Removal and Installation
REMOVALCAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large amount of refrigerant or lubricant leak is detected, never perform lubricant return operation. Refer to Perform Lubricant Return Operation.
When disconnec ...
Inside Key Antenna
Console
Removal and Installation
REMOVALRemove front center console bracket. Refer to Removal and Installation.
Disconnect inside key antenna (console) harness connector.
Remove inside key antenna (console) fixing TORX bolts , and then remove inside key antenna (console) .
INSTALLATIONInstall in t ...