- Precautions
- Around View Monitor Tools and Preparation
- Diagnosis and Repair Workflow
- Additional Service When Replacing Around View Monitor Control Unit
- Parameter Writing
- Mac Key Writing
- Writing of Calibration Data
- Calibrating Camera Image (around View Monitor)
- Simplified Confirmation by Birds-Eye View Screen
- Around View Monitor
- Normal Operating Condition
- Around View Monitor Control Unit
- Front Camera
- Rear Camera
- Side Camera
Other materials
Front Final Drive: R180a Tools and Preparation
Preparation
Special Service Tools
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
Tool number
(TechMate No)
Tool name Description
KV10111100
(NI-37228)
Seal cutter
Removing carrier cover
ST30720000
(NI-25405)
Drift
a: 77 mm (3 ...
Dash Side Finisher
Removal and Installation
CAUTION:
Never damage the body panel.REMOVALRemove front kicking plate. Refer to Removal and Installation.
Remove hood lock control handle (driver side). Refer to Removal and Installation.
Disengage dash trim clip from dash side finisher.
Disengage dash side finisher fixi ...
Front Door Lock Assembly
Removal and Installation
REMOVALRemove front door finisher. Refer to Removal and Installation.
Remove front door module assembly. Refer to Removal and Installation.
Remove front door outside handle bracket. Refer to Removal and Installation.
Remove front door lock assembly mounting TORX bolts.
Disen ...